Schartec Roller Shutter Control Unit with Radio Receiver 433Mhz

Schartec 230V Roller Door Controller with Integrated Radio Receiver and 2 Remote Controls

The Schartec 230V Roller Door Controller with integrated radio receiver is ideal for retrofitting or upgrading electric roller door operators in residential and light duty applications.

The integrated receiver supports both impulse and maintained contact operation, providing flexible control options for your roller door and compatible accessories.

Two 433MHz rolling code remote controls are included, providing secure and reliable wireless operation.

Roller Door Control

The controller features a single radio channel for operating one compatible roller door operator or other suitable electrical device. Please note that industrial door operators are not supported.

Three push buttons are located on the outside of the controller housing, allowing the roller door to be operated manually without a remote control.

The buttons can be configured for dedicated Open, Stop and Close operation. Alternatively, a single button can be configured to cycle through Open, Stop and Close commands.

The controller also allows the motor direction to be adjusted during setup, helping ensure correct opening and closing operation.

Key Features

• Designed for 230V electric roller door operators
• Integrated 433MHz radio receiver
• Secure rolling code technology
• Includes 2 remote controls
• Single channel operation
• Selectable impulse or maintained contact operation
• Configurable single button or three button control
• Three button mode provides dedicated Open, Stop and Close controls
• Adjustable motor direction
• Adjustable hold time relay
• Manual operation via buttons on the controller housing
• Wireless range of up to 50 metres, depending on local conditions
• Resistant to radio interference
• Remote controls include keyring attachments

Safety and Signalling Functions

The controller supports both normally closed contact and pulsed signal configurations, allowing compatible safety and signalling equipment to be connected.

Depending on the selected configuration, a connected warning light can indicate door movement or activation of a connected safety photocell.

Connection Options

The controller provides connections for:

• 230V AC warning or signal light
• External control devices, such as wall switches or key switches
• Safety photocell 1
• Safety photocell 2

Compatibility

This controller is exclusively compatible with the following Schartec remote controls:

• T6107, Article No. ST201001
• T3501, Article No. ST201010